Boho Mandals - Decorative Laser Cut Balustrade Panel

Price
$649
Color:
Size:
Pickup available at Our Showroom - 163 Wordsworth Street, Christchurch

Usually ready in 2-4 days

View store information

A free-spirited design that mixes different cultures and artistic expressions into an eclectic style

Our Mandala range of designs are inspired by the elements of the cosmos and represent it's depth and vibrations.

Versatile Sizing: Designed to seamlessly fit into most standard balustrade requirements, these panels stand at a height of 1100mm. A double fold at the top and a single fold at the bottom provides strength and allows for installation with or without handrails above.

Material : Powdercoated panels are made from 3.00 mm aluminium, corten products are made of 3.00 mm corten steel.

Affordable Luxury: We offer these panels in a standard 3mm thick sheet, striking the perfect balance between high-end aesthetics and budget-friendly pricing.

Durable & Sustainable Materials: Available in both Aluminum and Corten Steel, our panels are built to last for decades.

Please note: Structural engineer approval may be required for specific projects involving guarding at height. Ensure you seek professional advice before installing any components. 

How to Install Wall Art

Screws and Spacers for Pieces with Mounting Holes – Hard Wall

Step 1:Position on your wall where you would like the wall art to go.
Step 2:Mark the position of the mounting holes on the wall.
Step 3:Pre-drill into your mounting surface.
Step 4:Line the spacer up behind the wall art and drive suitable screws through the mounting holes.
Step 5:Tighten all screws till the wall art is secure.
Step 6:Enjoy your new wall hanging.

Screws and Spacers for Pieces with Mounting Holes – Plasterboard (Standard Interior Wall)

Step 1:Position on your wall where you would like the wall art to go.
Step 2:Mark the position of the mounting holes on the wall.
Step 3:If the piece is lighter than 4kg or if you have located a stud then skip step 4 and pre-drill holes instead.
Step 4:Install drywall anchors as per manufacturer instructions.
Step 5:Line the spacer up behind the wall art and drive suitable screws through the mounting holes.
Step 6:Tighten all screws till the wall art is secure.
Step 7:Enjoy your new wall hanging.

Flush Mount Screws for Pieces with Mounting Holes – Hard Wall

Step 1:Position on your wall where you would like the wall art to go.
Step 2:Mark the position of the mounting holes on the wall.
Step 3:Pre-drill into your mounting surface.
Step 4:Drive suitable screws through the mounting holes.
Step 5:Tighten all screws till the wall art is secure.
Step 6:Enjoy your new wall hanging.

Flush Mount Screws for Pieces with Mounting Holes – Plasterboard (Standard Interior Wall)

Step 1:Position on your wall where you would like the wall art to go.
Step 2:Mark the position of the mounting holes on the wall.
Step 3:If the piece is lighter than 4kg or if you have located a stud then skip step 4 and pre-drill holes instead.
Step 4:Install drywall anchors as per manufacturer instructions.
Step 5:Drive suitable screws through the mounting holes.
Step 6:Tighten all screws till the wall art is secure.
Step 7:Enjoy your new wall hanging.

Double Sided Tape, Command Strips or Hook and Loop Fasteners

Step 1:Clean the wall that you wish to mount the piece to, ensuring it is free of dust, grime, and debris.
Step 2:Place strips of your chosen adhesive product onto parts on the wall art where it will not be seen.
Step 3:Peel the backing and press firmly onto the surface for the manufacturers recommended time.

Other Installation Options

Get in touch with us to see if our wall art is suitable for your location

03 2616 023 or sales@designjunction.co.nz

Contact Us Below
or Call 03 2616 023


Design Junction Showroom

163 Wordsworth Street, Sydenham, Christchurch, 8023

AFTER SOMETHING CUSTOM?

Get in-touch with our friendly team and we can assist you in designing and manufacturing your metal dreams.

You may also like